Product

Mixed viscosity
(mPa·s,25℃)

Exothermic peak time
(min)

TG(℃)

Characteristics

SWANCOR

RB208-A/BS

600～1300

≥115

SWANCOR EzCicloRB208-A/BS is a two-component epoxy resin system. It has a slower viscosity increase rate at medium temperatures and a faster reactivity at high temperatures

Its characteristics make it more suitable for pultruded profiles and winding of large parts.

EzCicloRB208-A/BS is a recyclable resin that has been cured

The resin and fibers can be separated after the product is processed. The separated fibers and resins can be reused in composite materials.

SWANCOR

RB208-A/BV

400～1000

-

≥110

SWANCOR EzCicloRB208-A/BV is a two-component epoxy resin system. It has the advantages of low viscosity, long operating time, excellent operability and good curing transparency. Moreover, it can cure rapidly under appropriate temperature Settings and has excellent mechanical properties. It has excellent adhesion between carbon fiber and glass fiber, and is therefore suitable for transparent work-in-progress products

Pultrusion and winding of composite material components, such as insulating core rods, glass plates, and carbon plates.

EzCicloRB208-A/BV is a recyclable resin that has been cured

The resin and fibers can be separated after the product is processed. The separated fibers and resins can be reused in composite materials.

SWANCOR

RB508-A/B

600～1300

-

≥110

SWANCOR EzCicloRB508-A/B is a two-component epoxy resin system. It has the advantages of low viscosity, long operating time and excellent operability. It can cure rapidly at an appropriate temperature setting and has excellent mechanical properties. It has excellent adhesion between carbon fiber and glass fiber, and is therefore particularly suitable for the pultrusion process of composite material components, such as insulating mandrels, glass plates, and carbon plates.

RB508-A/B is a recyclable resin. After curing, the board can be processed to separate the resin from the fibers. The separated fibers and resins can be reused in composite materials.

SWANCOR

RB511-A/BS

200～300

330～480

≥75

The EzCiclo RB511 series is a recyclable room-temperature curing vacuum injection (SCRMIP and RTM) dedicated resin system composed of special epoxy resin main agents and curing agents. It is particularly suitable for processing applications of wind turbine blades, yachts and large structural products. Its main characteristics and advantages are low viscosity, moderate gelation time, excellent mechanical properties, high HDT, and good wettability of fibers (glass fiber/carbon fiber).

SWANCOR

RB513-1A/BF

700～950

(LVT#3-60rpm

35～60

> 70

SWANCOR EzCiclo RB513-1A/BF is a recyclable, room-temperature curing hand-lay-up special resin composed of a special epoxy resin main agent and curing agent. It is particularly suitable for processing applications of wind turbine blades, yachts and large structural products. Its main characteristic advantages are It has an appropriate operating viscosity and operating time, as well as good wettability to glass fiber and carbon fiber.

SWANCOR

RB513-A/BS

800～1200

20～60

≥75

The SWANCOR EzCiclo RB513 series is a recyclable, room-temperature curing hand-laminating special resin composed of a special epoxy resin main agent and curing agent. It is particularly suitable for the processing and application of wind turbine blades, yachts and large structural products. Its main characteristic advantages are Appropriate operating viscosity, adjustable gelation time, and good wettability to glass fiber and carbon fiber.

The SWANCOR EzCiclo RB513 series is equipped with curing agents of different curing speeds to meet the requirements of different operation times. Moreover, the mixing ratios of different curing agents are the same. When in use, different curing agents can be mixed according to special needs to achieve customized operation times, which is convenient for use.

Product

Mixed viscosity
(mPa·s,70℃)

Exothermic peak time
(min)

TG(℃)

Characteristics

SWANCOR

RB553

15000～25000

150℃ : 3 to 8

120℃ : 13-18

120～130

SWANCOR EzCiclo RB553 is a hot-melt epoxy resin for recyclable prepregs. Its formula does not contain Diuron or volatile components, making it safer and healthier to use. The resin has excellent compatibility with various reinforcing fiber materials and good impregnation properties, which can achieve better mechanical strength. The carbon fiber and glass fiber pre-impregnated materials made from it are suitable for various sports goods, such as bicycles, rackets, fishing rods, bats... Wait. In addition, it can also be applied in other fields, such as industrial uses, the automotive and motorcycle industry, aerospace, medical care, shipbuilding, as well as 3C products, building reinforcement, and so on.

SWANCOR

RB556

40000～50000

150℃ : 3 to 8

120℃ : 13-18

"120

SWANCOR EzCiclo RB556 is a hot-melt epoxy resin for recyclable prepregs. Its formula does not contain Diuron or volatile components, making it safer and healthier to use. The resin has excellent compatibility with various reinforcing fiber materials and good impregnation properties, which can achieve better mechanical strength. The carbon fiber and glass fiber pre-impregnated materials made from it are suitable for various sports goods, such as bicycles, rackets, fishing rods, bats... Wait. In addition, it can also be applied in other fields, such as industrial uses, the automotive and motorcycle industry, aerospace, medical care, shipbuilding, as well as 3C products, building reinforcement, and so on.

SWANCOR

RB564

28000～38000

150℃ : 3 to 8

120℃ : 13-18

"120

SWANCOR EzCiclo RB564 is a hot-melt epoxy resin for recyclable prepregs. Its formula does not contain Diuron or volatile components, making it safer and healthier to use. The resin has excellent compatibility with various reinforcing fiber materials and good impregnation properties, which can achieve better mechanical strength. The carbon fiber and glass fiber pre-impregnated materials made from it are suitable for various sports goods, such as bicycles, rackets, fishing rods, bats... Wait. In addition, it can also be applied in other fields, such as industrial uses, the automotive and motorcycle industry, aerospace, medical care, shipbuilding, as well as 3C products, building reinforcement, and so on.

SWANCOR

RB730-A/B

400～550

(LVT#2-30 RPM

120 to 160*1

≥70

SWANCOR EzCiclo RB730 is an epoxy resin-based adhesive specially developed for curing processes that require room-temperature curing. It is composed of a special epoxy resin main agent and a curing agent, and is particularly suitable for bonding applications between epoxy resin composites that require room-temperature curing processes, specifically treated metal materials, and other materials. Its main characteristics and advantages are: long applicable operation period, fast curing speed, and the ability to achieve curing at room temperature or with heating. It has good adhesion between epoxy composite materials, between metals, and between metals and epoxy composite materials. It has good fluidity, excellent operability and outstanding mechanical properties.