| Product | Mixed viscosity (mPa·s,25℃) |
Exothermic peak time (min) |
TG(℃) | Characteristics |
| SWANCOR HYVER | 120-180 | Used in conjunction with the heating process | >80 | 1. The price advantage is obvious 2. Low viscosity, quick establishment of product strength, which can improve the production efficiency of blades 3. It features a low heat release temperature, a long operating time, and excellent mechanical properties, meeting the design requirements of large blades |
| SWANCOR 2511-1A/BT | 200-300 | 30-110 ① | 85-95 | It is suitable for the vacuum injection process of external reinforcement of blades, with rapid curing and excellent mechanical properties |
| SWANCOR 2511-1A/BM | 200-300 | 170-250 ① | 85-95 | It is suitable for vacuum injection processes, with a short molding cycle and fast Tg establishment, which can assist in accelerating production |
| SWANCOR 2511-1A/BS | 215-255 | 280-360 ① | 80-90 | It is suitable for vacuum injection processes, has good toughness, moderate operating time and good universality |
| SWANCOR 2511-1AL/BV | 180-260 | 350-450 ① | >75 | Suitable for vacuum injection process, with low heat release Tg is established quickly and has a long operational time. It is applicable to the injection of large blades and offshore blades |
| SWANCOR 2519-1A/BS | 180-220 | 250-300 ② | 76-85 | It meets the technical requirements of one-piece formed blade injection, has a low mixing viscosity, and a fast Tg establishment, which conforms to the mechanical and fatigue performance requirements of Marine blades |
① : 28℃, 60%RH constant temperature and humidity chamber environment, 100g resin mixture
② : The time it takes for 1000g of resin mixture to reach 60 ℃ in a constant temperature and humidity chamber at 25℃ and 60%RH
